High Temperature Resistant Air Duct

High Temperature Resistant Air Duct 

 

 

Description

LT370 Corrosion Resistant Air Ducts

Application:Acid and alkali resistant ducts are particularly suitable for abrasive solids such as dust, powder and fiber; reactive media such as steam and smoke; as well as for industrial dust removal and suction and chemical industries.  
Properties:good heat resistance, high elongation and compression ratio of 4:1, external spiral wire for abrasion protection; external wire clamps tightly to the wall, food-grade wall in accordance with FDA 21 CFR 177.1550;

odorless and tasteless, resistant toadhesion; good resistance to alkali metals and acids, excellent chemical resistance, good UV and ozone resistance, small bending radius; not easy to bind, light weight. Light weight.  
Structure: external spiral metal wire support (metal sheet + wire)  
Material:Wall material: PTFE glass fiber coating, spiral wire: stainless steel (VA)  
Temperature range: approx. -20 °C to +250 °C.

LT400 Degree High Temperature Telescopic Air Duct

Structure:patented CP structure (CP is the abbreviation of clamp profile), special glass fiber coating, external spiral, galvanized steel clamps (steel inlaid with anti-wear plastic)  
Properties:
good vacuum characteristics, external spiral galvanized sheet plays a very good wear resistance, dragging on the ground will not damage the duct, flexible, arbitrary extension and contraction bending, flame retardant, insulation, high temperature resistance, anti-vibration, strong toughness, chemical resistance.    

Production diameter: 1 inch - 50 inches bending radius is about larger than the radius, stretch ratio: 5:1     
Color:Gray outside / white inside / galvanized steel sheet  
Length:
10m, can request: special color, special length, can be customized   
Application:
Used for diesel engine test bench, automobile exhaust emission, high temperature boiler gas extraction, used in exhaust equipment, engine structure, heating engine, solids such as dust, powder and fiber, gas environment such as steam and smoke, dust removal and extraction plant, heater discharge, aircraft equipment and military blending airbox and compressor, low pressure environment, such as construction machinery, coal mines.     
Temperature range:
 approx. -60 °C to +400 °C, short time up to approx. +450 °C   


LT408 High Temperature Resistant Telescopic Air Duct

Material:Nylon fabric     
Size:
2.0〃Ф- 16〃Ф     
Pipe thickness:
0.50mm     
Temperature:
-30℃+80℃ short time up to 100 degrees Steel wire: 0.8-1.4mm
Flow rate:
30M/S.   
Characteristics:
Covered with nylon cloth, supported by spiral steel wire inside, nylon cloth is hot pressed and bonded to the top and bottom of the wire to strengthen the adhesion and tension. Maximum pressure resistance 350MMWG, standard length 10M.  High elongation and bendability, easy construction.     
Uses:
dust collection, acid-resistant and tough delivery, clean room, general industrial plant, machinery, air conditioning exhaust, exhaust air  


LT409 Nylon Air Duct  

Application:Nylon ducts are used for hot air and air conditioning induced exhaust, welding air extraction system. Dryer exhaust for plastic industry, factory dust removal and extraction plant exhaust, heating air exhaust, blast furnace exhaust and welding air exhaust. Exhaust equipment, engine structure, heating engine.   Characteristics: Good high temperature resistance and flame retardant, stretchable, flexible, hoses bend radius about equal to the outer diameter  
Structure: elastic steel wire wrapped in the wall of the tube, tube wall, heat-resistant nylon fiber + PVC, elastic steel wire
Temperature range:
-30 to +100 ℃ instantaneous temperature +120 ℃  


LT410 High Temperature Resistant Telescopic Air Duct

High temperature resistant telescopic air duct 410 is made of steel wire wrapped with plastic bone as the skeleton and orange plastic mesh as the body of the duct. It is resistant to acid and alkali, high temperature, abrasion and aging, etc. The product is flexible, easy to connect, lightweight, easy to carry, and insulated. It can be widely used in the ventilation equipment, such as machine rooms, basements, tunnels, municipal duct works, underground cable maintenance, mechanical 

shipbuilding projects, fire-fighting ambulance smoke exhaust, and so on, to supply and exhaust air and collect smoke and dust. This high-temperature shrinkable air duct is the supporting air duct for portable exhaust fan!         It is widely used in machine rooms, basements, tunnels, municipal pipeline projects, underground cable maintenance, mechanical shipbuilding projects, fire-fighting ambulance smoke extraction and other poor working environment for air supply and exhaust, dust collection. This high-temperature shrinkable air duct is the supporting air duct for portable exhaust fan!         The size and length of the high-temperature resistant duct can be customized according to customer's requirements, and the longest length can be 50 meters.    


LT412 High Temperature Resistant Aluminum Foil Air Duct  

Application:Suitable for hot or cold air leadpipe. Used in high temperature exhaust gas emission. Kitchen hood exhaust, motor vehicle exhaust, constant temperature gas transmission, high temperature welding gas emission, plastic industry pellet dryer, printing machinery, blowers and compressors, engine construction, engine heating, aviation equipment and military equipment.  Properties: Single layer, good heat resistance. Sealing protection, internal smoothness, expandable fiber reinforcement, small bending radius, not easy to knot, in line with RoHs regulations  

Structure:the middle of the tube wall is covered with elastic steel wire to strengthen   

Material:spiral wire, elastic steel wire, tube wall material, aluminum foil  

Temperature range: -30℃ to +150℃ transient temperature +180℃


LT413 Aluminum Foil High Temperature Air Duct

Structure: Aluminum foil high temperature air duct is made of silver white medium temperature resistant and dust-free 0.1mm thick composite aluminum foil. The inner part is made of 8mm wide and 1.5mm thick groove shaped lead support metal sheet with spiral continuous tight clamping to make a delicate and easy bending construction with medium temperature resistance and suitable for clean room use.   Specification and characteristics:Tension strength:12kgf/25㎜ Inner diameter:2"~12 "

Applicable temperature:200 ℃ 
Standard length:5M/pcs Bend radius:D*1.25 Pipe spacing:19mm~24mm
Bendable duct material: double-layer laminated aluminum foil Standard color: aluminum silver 
General characteristics:easy to bend, shrink, medium temperature resistant, light weight medium temperature delicate air duct  


LT415 High Temperature Resistant Air Duct

Use:Used for hot air and air conditioning induced exhaust, welding air extraction system, plastic industry dryer exhaust, factory dust removal and extraction plant exhaust, heating air emission, blast furnace exhaust and welding air exhaust, exhaust equipment, engine structure, heating engine.  
Characteristics:
Good high temperature resistance and flame retardant, stretchable, flexible, hose bend radius about equal to the outer diameter.    
S
tructure: elastic steel wire wrapped in the tube wall, wall: heat-resistant nylon fiber, elastic steel wire      
T
emperature range: -30~+100℃ transient temperature +120℃        


LT455 Aluminum Exhaust Duct  

Material:Aluminum foil Aluminum foil thickness: 0.05-0.15mm
Characteristics: Aluminum high-temperature duct can meet the requirements of fire prevention, easy to bend into any angle, and can be freely expanded and contracted, convenient for transportation, and has the advantages of high temperature resistance, vibration and noise reduction, strong sealing, long service life, etc.  
Application:Aluminum exhaust ducts are widely used in oil extractors, water heaters, exhaust fans, ceramic furnaces, central air conditioning exhaust, etc.


LT460 High Temperature Resistant Ventilation Duct

Application:600 degree high temperature duct is especially suitable for flame-retardant suction hoses, solids such as dust and fiber, gaseous media such as steam and smoke; factory suction and dust removal, exhaust emissions, blower exhaust and welding gas emissions.    
Properties:
good heat resistance, expandable; external spiral wire to play the role of wear protection, can be dragged on the ground will not damage the duct, external steel wire clamping the wall, not easy to bond, strong toughness; arbitrary extension and bending     

Material: wall material: internal and external stainless steel wire reinforcement and special glass fiber coating, spiral wire: stainless steel (VA)     
Temperature range: approx. -60 °C to +600 °C, short time up to approx. +700 °C.     
Structure:Patented CP structure, external spiral wire support (metal sheet + wire), double walled tube       


LT463 High-Temperature Resistant Inner Clamp air duct

Application:Used in hot air and air conditioning guidance, and plastic material industry, granular drying, conveying system, printing industry, such as blowers with tubes can be compressed. It is used in the construction of exhaust equipment heating guide aviation military equipment aviation military equipment.
Properties:
High temperature resistant, strong, compressible, reinforced fiber, small bending radius, flame resistant (according to UL94-V0)     
Material.
 
Wall:
silicone fiberglass cloth     
Spiral:
Stainless steel sheet metal
Temperature range:
-70℃~+300℃      Length: 5M        


LT464 Composite Aluminum Foil Fiber Air Duct  

Application:High winding, temperature resistant to 180°C drying, hot air equipment .... Strong exhaust ducts     
Characteristics:
Easy to bend and shrink, strong medium temperature resistant air duct, standard color: white outside and silver inside
Specifications:
Standard length: 5M/pc, bending radius D*1.25, spiral leaded steel tube spacing: 19mm~24mm, bendable duct material: double-layer inner laminated aluminum glass cloth inner diameter 2"~12"           


LT490 900 Degree High Temperature Flame Retardant Air Duct    

Application:900 degree high temperature fire retardant duct, especially suitable for fire retardant hoses, solids such as dust and fibers, gaseous media such as steam and smoke; used for factory suction and dust removal, exhaust emissions, blowing furnace exhaust and welding gas emissions.
Properties:
double-layer, good heat resistance, expandable; easy to transport, space-saving, external spiral wire to play a wear-resistant protection, can be dragged on the ground without damage to the duct, external steel wire clamps tightly to the wall, not easy to knot, strong toughness.  

Structure:patented CP structure, external spiral metal wire support (metal sheet + wire), double-layer pipe wall.
Material: Wall material: internal and external stainless steel wire reinforcement and special glass fiber coating  
Spiral wire: Stainless steel (VA)  
Temperature range: approx. -60 °C to +900 °C, short time up to approx. +1100 °C. 


LT 500°C High Temperature Air Duct   

Application:Suitable for solids such as dust and fiber, gaseous media such as steam and smoke, factory suction and dust removal, exhaust emission, blowing furnace exhaust and welding gas emission.  
Properties:
Good heat resistance, high elongation and compression ratio of 3:1, external spiral wire for abrasion protection, external steel wire tightly clamped to the wall, small bending radius, not easy to nucleate, flame retardant according to: DIN 4102-B1.  

Structure: patented CP structure (CP is the abbreviation of clamp profile), external spiral metal wire support (metal sheet + wire) tube wall  
Material:Wall material: stainless steel spiral wire reinforced with special glass fiber coating, spiral wire: galvanized steel   Temperature range: approx. -60 °C to +500 °C, short time up to approx. +550 °C