High temperature resistant air duct / Corrosion resistant air duct

High temperature resistant air duct / Corrosion resistant air duct 

 

 

Description

【LT00421 / 180°C High Temperature Air Duct】

Performance: easy to bend and shrink, external structure support spiral reinforcement protection, can resist vibration, corrosion resistance, good chemical resistance ultra-high temperature hoses.              

Structure: External structure is supporting spiral, internal inlay nylon reinforcement.            

Temperature resistance range: -40°C to +180°C Instantaneous +200°C.



【LT00426 / 300°C High Temperature Air Duct】

Applications: Suitable for hot or cold air ducts, high temperature exhaust, motor vehicle exhaust, high temperature welding exhaust, pellet dryers for the plastics industry, printing machinery, blowers and compressors, engine construction, engine heating, aviation equipment and military equipment.            

Properties: Double-layer, good heat resistance, sealing protection, smooth interior, leak-proof, ultra-light weight, good stretching and bending, small bending radius, not easy to kink.      

Structure: The tube wall is covered with elastic steel wire in the middle, the tube surface is reinforced with ribbon fiber, and the rope is reinforced.      

Material: spiral wire, elastic steel wire, tube wall material, surface glass fiber coating.            

Temperature range: about -70°C to +300°C, short time up to +350°C.



【LT00429 / Neoprene Composite Hose】

Application: High temperature gas and air conditioner exhaust, dryer for plastic industry, dust removal and extraction plant, heating exhaust, blast furnace exhaust and welding gas exhaust, used in gas exhaust equipment, heating engine, mechanical equipment, aircraft equipment, military equipment.        

Properties: Dust free, high temperature resistant, flame retardant, smooth and soft inside, bending radius about equal to outer diameter. 

Temperature range: approx. -70°C to +300°C.



【LT00463/200℃ high temperature air duct】

It is made of special coated glass cloth and stainless steel plate (SUS304) buckled and pressed. It is easy to store and transport as it is freely retractable. The possible continuous use temperature is below 300℃ and the instantaneous temperature is 400℃. The special coated glass cloth sheet used in the material is an acceptable product for fire protection, as defined by JIS A1322. Suitable for repetitive bending.



【LT00370/Corrosion Resistant Ventilation Duct】

Application: Particularly suitable for abrasive solids such as dust, powder and fiber; reactive media such as steam and smoke; used in industrial dust removal and suction and chemical industry.        

Properties: Good heat resistance, high elongation and compression ratio of 4:1, external spiral wire for abrasion protection; external steel wire clamps tightly to the wall, food grade wall in accordance with: FDA21CFR177.1550; odorless and tasteless, anti-adhesive; good resistance to alkali metals and acids, excellent chemical resistance, good UV and ozone resistance, small bending radius; not easy to kink and light weight.       

Structure: External spiral metal wire support (metal sheet + wire)      

Material: wall material: PTFE glass fiber coating, spiral wire: stainless steel (VA)  

Temperature range: about -200℃ to +250℃      



【LT00400 / 400℃ High Temperature Air Duct】

Structure: special glass fiber coating, external spiral, galvanized steel sandwich sheet.       

Properties: good vacuum characteristics, external spiral galvanized sheet plays a very good wear resistance, flexible, arbitrary stretching and bending, flame retardant, insulating, high temperature resistance, anti-vibration, strong toughness, chemical resistance.  

 Applications: various machinery, paper industry, casting industry, petrochemical, power, steam, subway, automobile, food, medicine.      

Production diameter: 1 inch - 50 inches, bending radius is greater than the radius, expansion ratio: 5:1        Color: Gray outside/white inside/zinc-plated steel sheet;  Length:6m, can request: special color, special length, can be customized;        

Application:Used for diesel engine test bench, automobile exhaust emission, high temperature boiler gas extraction, used in exhaust equipment, engine structure, heating engine, solids such as dust, powder and fiber, gas environment such as steam and smoke, dust removal and extraction plant, heater discharge, aircraft equipment and military blending airbox and compressor, low pressure environment, such as construction machinery, coal mines.      Temperature range: approx. -60 °C to +400 °C, short time up to approx. +450 °C     

Structure: patented CP structure (CP is the abbreviation of clamp profile), special glass fiber coating, external spiral, galvanized steel clamps (steel with anti-wear plastic)     



【LT00460 / 600℃ High Temperature Air Duct】

Application: 600 degree high temperature duct is especially suitable for suction hoses requiring flame retardant, solids such as dust and fibers, gaseous media such as steam and smoke; factory suction and dust removal, exhaust gas emission, blower exhaust and welding gas emission.        

Properties: good heat resistance, expandable; external protection by spiral wire, can be dragged on the ground without damaging the duct, external wire clamps tightly to the wall, not easy to knot, strong toughness; arbitrary extension and bending.     Material: wall material: internal and external stainless steel wire reinforcement and special glass fiber coating, spiral wire: stainless steel (VA)         

Temperature range: approx. -60 °C to +600 °C, short time up to approx. +700 °C.         

Structure: Patented CP structure, external spiral wire support (metal sheet + wire), double walled tube



【LT00480 / 800℃ High Temperature Air Duct】

Application: High temperature air duct LKE480 is especially suitable for replenishing, discharging, turning and depalletizing of large grain warehouses in farms, stations and docks, as well as mechanical ducts for bulk loading, bulk transport, bulk unloading and conveying in the production process of grain processing, feed processing and beer brewing industries. It can also be used in steel plants, boiler exhaust systems and hot air exhaust and suction occasions.       

Material: low carbon galvanized steel belt, SUS304 stainless steel       

Use: Used for conveying grain (grain, rice, shell, flour), wood chips, yellow sand, coke, crushed ore and ventilation pipes.      

Temperature range: -70 degrees to +1000 degrees



【LT00490 / 900℃ High Temperature Air Duct】

Application: 900 degrees high temperature fire retardant duct, especially suitable for fire retardant hoses, solids such as dust and fiber, gaseous media such as steam and smoke; used for factory vacuum dust removal, exhaust emissions, blowing furnace exhaust and welding gas emissions. 

Properties: double-layer, good heat resistance, expandable; easy to transport, space-saving, external spiral wire to play a wear-resistant protection, can be dragged on the ground without damage to the duct, external steel wire clamps tightly to the wall, not easy to knot, strong toughness.      

Structure: patented CP structure, external spiral metal wire support (metal sheet + wire), double wall. 

Material: Wall material: internal and external stainless steel wire reinforcement and special glass fiber coating, spiral wire: stainless steel (VA).      

Temperature range: approx. -60 °C to +900 °C, short time up to approx. +1100 °C.